To create your own power station, you need various components such as batteries, an inverter, a charge controller, a charging device, and more. One of the important elements is the solar panels. They allow you to harness energy from the sun, which can be used to charge batteries and power household appliances.
Solar panels can be installed in many locations. If you have a house on the ground, you can install panels on the roof or on the plot of land itself. Mounting can be done in different ways: either a metal frame that is screwed onto the roof or cemented into the ground, or a special tracker that allows the panels to follow the sun throughout the day.
It is even possible to install solar panels in an apartment. You need to consider how much sunlight enters your windows during the day and how well it shines specifically in your apartment. If there is enough light, you can install panels near the window - on top or below, as well as on the balcony or loggia. It is even possible to place panels inside the apartment, outside the window, but in this case, there will be a loss of energy due to additional glass, which can amount to 50% or more of the power. For example, from a 100-watt panel, you can expect to get 30 to 50 watts through the glass.
I bought this solar panel here
If you need more power, you need to purchase multiple solar panels. Calculate this parameter based on the amount of energy you will consume. For example, one 100-watt panel may be enough for one of these devices: a large TV, laptop, some models of refrigerators, LED strips or bulbs, charging several mobile phones, power banks, and so on.
The panel is shipped in a large box with additional protection in the form of soft material inside.
The glass panel is also covered with a protective backing.
The casing is made of metal and is quite sturdy.
The crystals are connected by contact plates, sealed with a sealant, and covered with glass.
On the back wall, there are contacts with wires and connectors, a label with panel specifications, and mounting holes.
Maximum power: 100 Watts
Voltage: 18-22 Volts
Current: 5.5 Amps
Dimensions: 1175 x 535 x 25 Millimeters
The box contains diodes, and contacts from the plates are connected to cables and special connectors inside.
YouTube
Odysee
I bought this solar panel here